1. Open the hood and find the oil dipstick – It usually has a brightly colored handle, either a finger-sized circle or T-shaped
2. Remove and wipe the dipstick off then replace it – Use a lint-free rag or paper towel, and push the dipstick all the way back in
3. Remove the dipstick again and examine it – With the excess wiped off, the level should be clearly indicated
Dipsticks have two indicators (pinholes, lines, “min” and “max”) or a crosshatch that should be compared with the oil level.
Full: At “full” mark or at least halfway between marks: Oil level is good
Low: At “low” mark or less than halfway between marks: Top up to “full” mark.
Danger: Below lowest mark or no oil on stick at all: Add oil ASAP
Depending on the model of the car, the oil dipstick usually has a yellow handle, while the transmission dipstick usually has a red handle. This is not always the case, but it is common with cars made in 1995 and on. Additionally, starting around 1995, manufacturers began placing text on the handle to label it as “transmission” or “oil”. Also, please keep in mind that transmission fluid tends to have a pink/reddish color, while motor oil is a brown/black color.
1. Locate: Locate the oil filler cap, usually marked with the word “oil” or an oil can icon. Make sure it’s for oil and not another fluid, wipe away dirt and dust from the cap, and remove the cap.
2. Reference: Refer to your owner’s manual, to estimate how much oil to add. If the oil level was between marks, this will usually be less than a quart.
3. Pour: Using a CLEAN funnel if desired, pour oil through the opening into the engine. Pour slowly to avoid spills. Dipsticks have two indicators (pinholes, lines, “min” and “max”) or a crosshatch that should be compared with the oil level.
4. Repeat: Ensure the oil is filled to the proper level. Again, be sure not to overfill. Wipe off any spills and replace the cap. Check that the cap is secured.
– Check the oil every other time you fill up.
– Consult your owner’s manual to determine whether to check the oil when it’s cold or at operating temperature.
– Before checking oil, make sure the engine has been off at least 10 minutes so oil settles back into the oil pan and you don’t get a false reading.
– Park on flat, level ground for reliable dipstick readings.
– Examine the oil. Golden is still new enough; very dark indicates the need for an oil change. Other colors, milky globs or metal particles could indicate other fluid leaks or worse.
– Avoid overfilling — pour a little oil in and then recheck the level.
– If your oil is constantly low, it could indicate a leak. Before taking your car to a mechanic, try “No Leak” engine oil.
– Change the oil when it’s dirty or at intervals of about 3,000 miles.
Some products you buy come with a lifestyle change, and firearms are at the top of the list. In the…
By Marc Blackman, CEO Congratulations to Dr. Jeff Jankowski, professor of chemistry at North Central College, who became the first…
You can winterize your home, car, and even your pool if you happen to be the most popular house in…
Gold Eagle Co.’s latest Women in Leadership event featured a Women’s Power Brunch focusing on “Workplace Leadership: The Power of…
Every pet owner has experienced that feeling of pure joy when returning home after some time away. No matter how…
There are so many reasons to invest in natural stone for your home. Whether it's placing limestone tiles for a…