1. Wash at the Right Time
The paint should be cool when you start washing. This means not washing soon after driving and waiting until the day cools off. Otherwise, water will flash-dry and leave patches.
2. Get the Right Equipment
The trusty bucket and sponge combination will serve you well, provided they have been cleaned well. Ideally, have two; one with soap and one with normal water to rinse the dirt off into. You should also get a car-washing, microfiber mitt, which come cheap from any auto supply store. You will probably also need a good brush. These allow the tough and hard to reach angles to get as clean as everything else.
Do not use dish soap, as this can remove car wax along with dirt. Instead, buy soap specifically made for washing cars. You should also be using clay and polish made specifically for car detailing. These should also be available at most auto part stores.
3. Start with the Wheels
Starting with the wheels guarantees that wheel grime does not fly up and ruin the newly-washed body. Make sure that you know what finish your rims have before using product on them. Chrome, aluminum, and standard clear-coating all require different chemicals with different levels of abrasion.
4. Wash One Panel to the Next
Take the sponge and mitt, using them where needed depending on the contour of your car. Start at the top of the car and move to each distinct panel. These panels include the hood, trunk, and body segments. Wash each one with soapy water and rinse them off completely before moving to the next segment.
5. Drying the Car
Do not let your car air dry. Allowing the sun to take care of this step makes the dry uneven and leaves water spots all over the car. It is recommended that you use a microfiber towel for this step. Using normal household towels often leaves fine strands of fabric on the car, undoing all the work you just put into washing. A microfiber towel is more absorbent, does not leave this residue, and is gentle on the finish.
6. Break out the Clay
Clay specifically made for car polishing leaves the finish smooth to the touch. Most clay kits come with lubricant; apply this to the clay first and then on the car. Begin rubbing the clay against the car in light motions. If the clay changes color, fold it and use the light side again. By the end of this, the car should feel smooth like glass.
7. Apply the Polisher to Specific Areas
Once the car feels smooth, you can begin polishing out defects and marks. For marks, apply the polisher to the clean rag used if polishing by hand. A dual-action polisher is safe, easy, and will save a lot of time. You can polish by hand if you are not afraid of adding extra work. Apply in small areas at a time, focusing where marks and damage appear most. After no longer than a minute, wipe off while still wet. Do not be afraid to throw some elbow grease into it.
8. Finish Polishing
To finish, apply polish across the rest of the car in small areas. Work it off lightly with less force this time and remove each area while still wet before moving on. By the end, the car should appear glossy and vibrant.
With the proper time and technique, washing a car can revitalize it and make it look like new again. If desired, adding wax after polishing can make the vehicle stay brilliant longer. With a bit of targeted effort, your car can be something worth being proud of when you drive it. These steps will help you get the best results at home.
Some products you buy come with a lifestyle change, and firearms are at the top of the list. In the…
By Marc Blackman, CEO Congratulations to Dr. Jeff Jankowski, professor of chemistry at North Central College, who became the first…
You can winterize your home, car, and even your pool if you happen to be the most popular house in…
Gold Eagle Co.’s latest Women in Leadership event featured a Women’s Power Brunch focusing on “Workplace Leadership: The Power of…
Every pet owner has experienced that feeling of pure joy when returning home after some time away. No matter how…
There are so many reasons to invest in natural stone for your home. Whether it's placing limestone tiles for a…