303 Touchless Sealant – What You Need to Know
If you are tired of spending hours upon hours in the driveway or garage to give your vehicle a proper wax, there is an intelligent alternative on the market formulated to fit your needs. Say hello to 303 Touchless Sealant, an auto sealant designed to safeguard the surfaces of your car while saving you time in the process. Using a Silicon Dioxide (SiO2) formula, 303 Touchless Sealant is the epitome of automotive products that help you work smarter, not harder. If you’re curious to know the intricacies of how this revolutionary spray works, you’ve come to the right place. We have detailed the ins and outs of the product right here.
303 Touchless Sealant Explained
303 Touchless Sealant is comprised of SiO2, which means it is only activated when water comes into contact with the product. In other words, you only have to spray the sealant onto the surface of your vehicle and follow it up by rinsing it with the hose. It’s really that simple and fast. Once the water pressure from a hose hits treated surface areas, the molecules bond together to create a level of protection comparable to a knight’s chainmail armor. Since all of the molecules have bonded tightly together, it creates a defense mechanism on the surface. This way, elements from the outside such as rain instantly bead off from treated areas.
How to Use 303 Touchless Sealant
A little product goes a long way with 303 Touchless Sealant, so there is no need to go overboard with the amount you use. It’s also important to note that the auto sealant should only be applied out of direct sunlight, so the surface temperature of your vehicle is as cool as possible. A low surface temperature is necessary to achieve the best results.
Keeping both of these points in mind, follow the rudimentary steps below to achieve a deep, wet shine that will leave your vehicle protected and amaze you with its water-beading capabilities.
Step 1:
Wash your vehicle as you normally would to ensure that each surface area of your car is clean and ready to apply 303 Touchless Sealant.
Step 2:
Spray a modest amount of product evenly across the surface you wish to treat, and only focus on one section at a time. Using a gentle mist is all you need to attain optimal results.
Step 3:
Once you’ve applied the sealant to the dedicated section of your vehicle, rinse it off quickly to prevent the product from drying.
Repeat steps two and three for every section of your vehicle. Then you can test to see if 303 Touchless Sealant is working by spraying water on treated areas. If you see the water molecules bead off the surface, you will know you applied it correctly.
Lastly, be mindful to always rinse the product off quickly (as noted in step 3) as allowing the sealant to dry can potentially lead to unwanted streaking.
Using 303 Touchless Sealant In Between Waxes
Some automotive enthusiasts stick true to the philosophy that no product can genuinely protect the surfaces of their vehicle in the way that a ceramic coating can. While this way of thinking is understandable, the touchless auto sealant can still act as a bridge between treatments. Therefore, if you are in between waxings and need a protectant to hold you over until next time, 303 Touchless Sealant is a perfect alternative. Use it just once, and you might become a firm believer after seeing the SiO2 formula in action. You won’t know until you try it, and there are plenty of folks who have come full circle from their strongly held belief in ceramic coatings.
303 Touchless Sealant FAQ
Sometimes it’s helpful to keep things as simple as possible, which is why we’ve aggregated the most commonly asked questions people have about 303 Touchless Sealant.
Q: What is the chemical makeup of 303 Touchless Sealant?
A: It is comprised of a Silicon Dioxide (SiO2) formula and also includes a hydrophobic component to aid with water repellency.
Q: What happens if I don’t rinse off the product after applying it?
A: You run the risk of streaking on your paint’s surface due to the chemical makeup of 303 Touchless Sealant. If this happens, simply rinse off again to achieve the desired effect.
Q: Is it possible to use 303 Touchless Sealant on top of a car that is already waxed?
A: Yes, you can use 303 Touchless Sealant as a top layer.
Q: How does the product differ from a Carnauba wax?
A: The main difference between 303 Touchless Sealant and Carnauba wax is durability. Whereas the latter will safeguard surfaces for three months, 303 Touchless Sealant provides up to six months of protection.
Now that you have received a crash course on 303 Touchless Sealant, the time has finally come for you to see it in action. Follow the link below to get started!