STA-BIL Sport Bike Cleaner and Protectant is engineered to keep bicycles looking showroom new. Exactly what you’d expect from the brand that for over 60 years has protected & preserved millions of vehicles, boats, and outdoor power equipment.

Cleans •  Protects • Revives
Our specialized formula contains a powerful cleanser that quickly and easily removes the nasty dirt, grit, dust, and salt that can damage your bike —just spray on and wipe off. BONUS: It dries quickly, leaving a protectant shield that guards your bike from rust, corrosion, and UV RAYS. DOUBLE BONUS: It’ll even revive dull finishes on rubber, plastic, and carbon fiber surfaces.

So Simple and Versatile
Directions: Spray on soft towel and wipe all bike surfaces. For dirtier jobs or protection in nooks and crannies, spray directly on area and wipe off. Use on metal, carbon fiber, rubber, plastic, paints, and leather. Reapply every 5 weeks. Between applications, simply hose off excessive dirt, grit, or dust without worry of rust or corrosion. DO NOT USE ON BRAKE PADS.

You love your bike. STA-BIL helps you love it longer.

The post STA-BIL® Sport Bike Cleaner and Protectant appeared first on Gold Eagle.

Directions:

Clean and remove any loose dirt and debris on roof. Add 5 oz. of 303® Rubber Roof Cleaner to a 5-gallon bucket and fill with clean water. Clean roof using scrubbing tool like a brush or mop, cleaning one 3-4 sq. ft. section at a time. Repeat on all sections of roof, rinsing tools as necessary. After all sections have been cleaned, rinse entire roof with a hose and let dry. Never walk on wet roof. You may also add to an empty spray bottle and spray on roof instead of mixing with water a bucket.

Rinse any residual runoff immediately to prevent streaking/water marks from occurring over sides. 303® Rubber Roof Cleaner will not harm solar panels, however we do not recommend cleaning solar panels with this product.

The post 303® Rubber Roof Cleaner appeared first on Gold Eagle.

Directions:

Shake well before use. Use only on dry surfaces. Spray product directly on black streaks. Allow product to remain on surface for 2-3 minutes. Gently scrub and then wipe off with a wet towel, microfiber, or sponge. For stubborn stains, repeat as needed.

The post 303® Black Streak Remover appeared first on Gold Eagle.

Directions:

Add 1 oz. of 303® RV Wash & Seal to a 5 gallon bucket and fill with clean water. Gently scrub surface with wash mitt or other cleaning accessory to remove dirt and grime. Rinse entire RV thoroughly. Dry immediately with a clean drying towel for best results.

The post 303® RV Wash & Seal appeared first on Gold Eagle.

Keeping your bicycle in top riding condition is easier than ever, thanks to STA-BIL Bike Chain Cleaner and Lubricant. This premium lubricant works by penetrating deep into a bike’s chain, cables, and derailleurs with one easy-to-apply product. The formula works by loosening grime and reducing friction to drastically improve drivetrain performance in the most convenient way possible.

Easy Application for Instant Enhancements

STA-BIL Bike Chain Cleaner and Lubricant is best used by first removing dirt and grime from a bicycle’s chain with a clean rag. After prepping the chain, apply a thin layer of STA-BIL Bike Chain Cleaner and Lubricant while moving the pedal backward. This one-two system is all you need to remove old dirt and foreign substances from the chain and gears to enhance riding performance.

Get Back to Riding

Following application, STA-BIL Bike Chain Cleaner and Lubricant will proactively prevent rust from building on treated areas and limits corrosion build-up. Given its ease of use, this product is highly recommended for cyclists who want to extend their bikes’ lives in the most straightforward way possible. The next time you notice that your bicycle chain is dry or grimy, apply STA-BIL SPORT’s Bike Chain Cleaner and Lubricant to get back to the road ahead!

Directions: Apply generously while peddling backward, wipe chain clean with a rag. Leaves a thin, protective lube that resists dirt, grit, and rust. For dirtier chains,  apply and wipe chain a second time.

The post STA-BIL® Sport Bike Chain Cleaner and Lubricant appeared first on Gold Eagle.

All you have to do to use STA-BIL Ceramic Pro Guard is spray it on and give it a little time to cure. The comprehensive formula goes to work on its own, leaving a tough layer of defense on metal and plastic surfaces. Best of all, the spray works effectively on both gas and electric equipment so you can use it on whichever type of mower or snowblower you have in your inventory.

Lastly, STA-BIL Ceramic Pro Guard is so dynamic that you can also use it as a detailing spray on the exterior of your equipment to give it a glossy finish. Simply spray a small amount onto a microfiber towel before applying.

Directions: Have a clean, dry surface before using Ceramic Pro-Guard. Apply a light layer of product to the entire surface you are treating. Allow to cure/dry for 24 hours before using the equipment. Re-apply as needed. Once applied any future build-up can be easily rinsed away with a hose. When using as a detail spray it is recommended to spray onto a microfiber towel and wipe onto the surface.

The post STA-BIL® Ceramic Pro-Guard appeared first on Gold Eagle.

Ever since its inception in 1958, the STA-BIL Brand has been dedicated to preserving the things you care about most. That is why we are proud to introduce a product that will keep your guns working in great condition.

Our Gun CLP cleans away gun powder and residue, provides superior lubrication with a unique Anti-Wear additive and protects against corrosion by displacing moisture. Even better, the product is highly versatile as it works well with pistols, rifles, and shotguns.

STA-BIL cares about your freedom and wants your firearms to be ready when you are. Allow our Gun CLP to keep them accessible and functioning at the highest level.

Directions: Before using this product, make sure the weapon is unloaded. Twist top to open. Dispense a small drop of STA-BIL Gun CLP onto manufacturer-recommended locations of the gun for superior lubrication. This can also be used to clean and protect the gun’s components from corrosion and wear.

The post STA-BIL® Gun CLP appeared first on Gold Eagle.

Directions: First, use a brush to remove heavy debris that may be present on your equipment. Once the blade is free of heavy contaminants, apply a generous amount of STA-BIL Blade Guard to the surface and side of the blade. Run for a few seconds to spread the liquid. You are now ready to go.

For California Residents:

WARNING: Cancer and Reproductive Harm
For more information go to www.P65Warnings.ca.gov

The post STA-BIL® Blade Guard appeared first on Gold Eagle.

Directions:

Shake product well before using. For best results, use when tires and wheels are cool to the touch. Rinse wheel and tire with hose, then spray product on both, making sure to cover entire area. Let product sit for 2 minutes. For tires: use a hard bristled tire brush to agitate product on tire, to remove any dirt or browning on the tire’s rubber surface. Rinse thoroughly. For wheels: Use a wheel cleaning tool to clean and agitate product on wheel surface, then rinse wheel thoroughly. For both surfaces, if any residue remains, repeat the steps as necessary.

For California Residents:

WARNING: Cancer and Reproductive Harm
For more information go to www.P65Warnings.ca.gov

The post 303® Wheel & Tire Cleaner appeared first on Gold Eagle.

Directions:

Shake product well before using. For best results, use when wheels or rims are cool to the touch. Rinse wheel with hose, then spray product directly onto wheel, and let it sit for 2 minutes. After 2 minutes, use a wheel cleaning tool to clean and agitate product on wheel surface, then rinse wheel thoroughly. If any residue remains, repeat the steps as necessary. To use as a paint decontamination spray: Wash car, and dry surface. Spray surface with 303® Wheel Cleaner, and let product sit for 5 minutes. The product should turn to a purple tone as it removes iron and other contaminates from the surface. Once this is done, rinse, and wash your car again to remove the product from the surface. You can then follow up with clay barring, correction, and protection as you wish.

The post 303® Wheel Cleaner appeared first on Gold Eagle.