$12.99 – $351.99
Originally engineered for aerospace and aviation applications, 303® Aerospace Protectant has found its way into millions of homes for day-to-day use on vehicles, sports equipment, patio furniture accessories and more. Unlike many protectants that leave greasy residues, Aerospace Protectant dries to a clear matte finish. And because it’s water-based, this protectant is safe to use on all products, from your vehicle’s paint job and leather seats to internal engine parts.
There’s a lot of power packed into this one product. A premium surface treatment, Aerospace Protectant not only protects against fading, discoloration and cracking from harmful UV rays, but repels dust and stains, too. Simply spray on and wipe dry for a beautiful, matte finish that protects your vehicle from road grime and favorite belongings from dust and soiling. Best of all, each application will last for months.
No other protectant beautifies as intensely or preserves as powerfully. Keep UV-sensitive materials looking new, year after year.
Use only on clean surfaces. For best results use 303® Multi-Surface Cleaner. Place a drop cloth under the cleaner to be treated to catch any overspray. Out of direct sun, spray surface with 303® Aerospace Protectant and WIPE COMPLETELY DRY. If streaking occurs, too much product has been used. Use a wet towel to remove excess, IMMEDIATELY WIPE COMPLETELY DRY.
Note: this product does not air dry. Extra buffing with a dry cloth INCREASES bonding, repellency & longevity. Apply every 3-5 weeks for maximum UV protection.
Great for use on a variety of surfaces such as: vinyl, leather, plastics, synthetic & natural rubber, PVC, gel coat & fiberglass.
Ideal for: Hypalon inflatable boats, wet/dry suits, tires, side-out seals, RV EDPM rubber roofing (for your safety, never walk on a wet roof), helmets, visors, and goggles. Not for use on unfinished leathers (such as suede), fabrics (canvas), floorings, clear plastics, gauge panels, or headlights.
WARNING: Cancer and Reproductive Harm
For more information go to www.P65Warnings.ca.gov
Wipes – SKU 30321
10oz – SKU 30307
16oz – SKU 30308CSR
32oz – SKU 30313CSR
1gal – SKU 30320
5gal – SKU 30375
303 Protectant is a water-based proprietary formula that contains no petroleum distillates, alcohol, mineral oil or harmful silicone oils.
303 Protectant does not contain any harmful silicone oils, which can dry out and damage surfaces.
Originally engineered for aerospace and aviation applications, 303® Aerospace Protectant is a premium surface treatment that instantly beautifies and provides superior protection against harmful UV rays that can cause loss of mechanical properties such as: discoloration, fading, embrittlement, cracking and/or chalking. Treated surfaces repel dirt, soiling, and staining.
303® Aerospace Protectant is great for use on a variety of surfaces including vinyl, plastic, synthetic and natural rubber, PVC, finished leather, colored gel-coat fiberglass, and more! DO NOT use on unfinished leathers (such as suede), fabrics, floorings, clear plastics, gauge panels, or headlights.
Each formula is unique and specially formulated for specific applications.
You may use 303® Aerospace Protectant on wicker furniture as long as it is smooth. It is not recommended on weave or porous surfaces as they may trap excess product which could later cause streaks.
No, we do not recommend using on fabrics since this is a water-based formula.
Yes, it can be used on Neoprene material. However, make sure to wipe off as much product as possible during application and make sure that it is completely dry before exposing the material to water.
Yes. You can certainly use 303 Protectant on poly-coated furniture. Just remember to fully wipe off the product!
It is recommended to re-apply product every 30-45 days for best results, and maximum protection against the sun’s harmful UV rays.
To remove the cloudiness on the glass, we recommend the following steps…
1.) Put hot water on cloudy surface, the hot water will strip the Aerospace Protectant off the surface. Be very careful when handling!
2.) You may have to agitate the surface. Use a soft brush or something that won’t hurt the surface.
3.) Wash off with soap and water.
On average a 16oz. bottle treats 40sq. feet.
Typically 303 Protectant will leave streaking if too much product has been applied and not fully buffed into the surface. 303 Protectant needs to be buffed/wiped so that it can bond to the surface. Sometimes, you may not be able to see excess product on the surface but streaking can occur later. We recommend washing the surface with hot water. Then once fully dried, apply the 303 Protectant again.
No. 303 Aerospace Protectant is a water based formula that contains no flammable materials such as petroleum distillates or alcohol.
There is no unified industry standard rating for UV protection such as in skin sunscreen (SPF or Sun Protection Factor). However, 303 Protectant will block up to 98% of UV radiation if used properly and consistently.
The label (marine, automotive, patio, etc.) varies depending on which market you find it in. The protectant formula is the same featuring the product benefits and mode of application. So whichever item (label) you get will be a great choice!
